Corrosive Protection of Metal Materials in Cooling Water
[1]
Cervová J. , Department of Materials Science, Faculty of Metallurgy, Technical University of Košice, Slovakia.
[2]
Hagarová M. , Department of Materials Science, Faculty of Metallurgy, Technical University of Košice, Slovakia.
[3]
Lacková P. , Department of Materials Science, Faculty of Metallurgy, Technical University of Košice, Slovakia.
The work deals with the study on the influence of the inhibitor based on phosphonates (S-fp) on corrosion protection of metal materials in cooling water. The specimens, in a form of corrosive coupons, have been placed in an open circulating system of the cooling water for one month. The protective effect of S-fp inhibitor is based on production of insoluble salts with Ca2+, Zn2+ ions present in the cooling water and on forming a protection layer on the surface of exposed metal coupons. The corrosion rate in cooling water with and without inhibitor was determined by measuring of weight change of exposed coupons. The analysis of samples surface was carried out, too. After one month exposure, the coupons were removed from the corrosion slings of the cooling system. The highest inhibitor efficiency was observed on coupons from brass. The addition of inhibitor to cooling water increases corrosion resistance of metal materials by formation a high quality protective layer on their surface.
Corrosion, Inhibitor, Cooling Water System, Corrosion Coupons
[1]
Feng X, Shen B, Wang B. Recirculating cooling - water network with an intermediate cooling -water main. Energy & Fuels. 2005; 19 (4); 1723-1728.
[2]
Kim JK, Smith R. Cooling system design for water and wastewater minimization. Industrial and Engineering Chemistry Research. 2004; 43(2); 608-613.
[3]
Panjeshahia MH, Ataeib A, Gharaiec M, Parandc R. Optimum design of cooling water systems for energy and water conservation. Chemical engineering research and design. 2009; 87; 200–209
[4]
Abulkibash A, Khaled M, Ali BE, Emad M. Corrosion inhibition of steel in cooling water system by 2-phosphonobutane-1,2,4-Tricarboxylic acid and polyvinylpyrrolidone. The Arabian Journal for Science and Engineering. 2008; 33(1); 29-40.
[5]
Touir R, Dkhireche N, Touhami ME, Lakhrissi M, Lakhrissi B, Sfaira M. Corrosion and scale processes and their inhibition in simulated cooling water systems by monosaccharides derivatives: Part I: EIS study. Desalination. 2009; 249; 922-928.
[6]
Lukáč P, Kapalo P. Analysis of heat exchange processes in the hot water distribution systems during its interrupted operation. Acta Metallurgica Slovaca. 2011; 4; 253-262.
[7]
Gallegos AA, Martinez SS, Ramirez JL. Evaluation of Water Corrosivity Using a Corrosion Rate Model for a Cooling Water System. Journal of New Materials for Electrochemical Systems. 2005; 8; 133-142.
[8]
Soror TY. Scale and Corrosion Prevention in Cooling Water Systems Part I: Calcium Carbonate. The Open Corrosion Journal. 2009; 2; 45-50.
[9]
Draganovská D, Jankura D. Evaluation of activity and micro-geometry on blasting metal surface. Surface treatment. 2012; 11 (8); 1-4
[10]
Williams G, Geary S, McMurray HN. Smart release corrosion inhibitor pigments based on organic ion-exchange resins. Corrosion Science. 2012; 57; 139–147.
[11]
Paliwoda PG, Stratmann M, Rohwerder M, Potje KK, Lu Y, Pich AZ, et al. On the development of polypyrrole coatings with selfhealing properties for iron corrosion protection. Corrosion Science 2005; 47: 3216 – 3233.
[12]
Raheem D. Effect of Mixed Corrosion Inhibitors in Cooling Water System. Al-Khwarizmi Engineering Journal. 2011; 7(4); 76-87.
[13]
Nowack B. Environmental chemistry of phosponates. Water Reserch. 2003; 37; 2533-2546.
[14]
Mochizuki F, Tsuneki T. Preprint for 14th Ann. Meeting Japan Ind. Water Assoc. 1979; 80-83.
[15]
Dogruoz N, Minnos B, Sungur EI, Cotuk A. Biofilm Formation on Copper and Galvanized Steel Surfaces in a Cooling-Water System. IUFS Journal of Biology. 2009; 68(2); 105-111.
[16]
Internal materials of Company Kurita Europe GmbH..
[17]
Nishino T, Fujisaki M. J.Japan Petrol Institution. 1970; 13 (7); 119-120.
[18]
Geiger G, Esmacher MJ. CONTROLLING CORROSION IN COOLING WATER SYSTEMS – PART 2: Inhibiting and Monitoring Corrosion. GE Water & Process Technologies. 2012; 3; 29-34.
[19]
Habbart L. Treatment of Cooling Water. 1nd. ed. Berlin: Springer-Verlag Hiedelberg; 2009
